Kyocera KM-2530 Service Manual page 110

Maintenance
item No.
U093 Setting the exposure density gradient
Description
Changes the exposure density gradient in manual density mode, depending on respective image modes (text,
text and photo, photo, text in fax mode, photo in fax mode).
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment. Also used to
make copy image darker or lighter.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the image mode to be adjusted and press the start key. The screen for the selected item is
displayed.
Display
MIXED
TEXT
PHOTO
FAX TEXT
FAX PHOTO
Setting
1. Select the item to be adjusted. The selected item is displayed in reverse.
Display
DARKER
LIGHTER
2. Adjust the setting using the cursor up/down keys.
Display
MIXED DARKER/MIXED LIGHTER
TEXT DARKER/TEXT LIGHTER
PHOTO DARKER/PHOTO LIGHTER
FAX TEXT DARKER/FAX TEXT LIGHTER
FAX PHOTO DARKER/FAX PHOTO LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
Description
Density in text and photo mode
Density in text mode
Density in photo mode
Density in the text in fax mode
Density in the photo in fax mode
Description
Change in density when manual density is set dark
Change in density when manual density is set light
Image density
Dark
Set to LIGHTER
Light
Light Center
Figure 1-4-5 Exposure density gradient
Description
Setting range
0 to 3/0 to 3
0 to 3/0 to 3
0 to 3/0 to 3
0 to 4/0 to 9
0 to 6/0 to 6
Setting: 0
Setting: 3
Set to DARKER
Density adjustment
Dark
2DF
Initial setting
0/0
0/0
0/0
2/2
3/3
1-4-23