In IEEE Std 802.1Qaz™-201 1:
•
ETS Configuration.
ETS Recommendation.
PFC.
APP.
HP devices can send these types of DCBX information to a server's or disk device's adapter supporting
FCoE. However, HP devices cannot accept these types of DCBX information.
DCBX configuration task list
Tasks at a glance
(Required.)
(Required.)
(Required.) Configuring ETS parameters:
•
Configuring the 802.1p-to-local priority mapping
•
Configuring group-based WRR queuing
(Required.)
(Optional.)
Enabling LLDP and DCBX TLV advertising
To enable the device to advertise APP, ETS, and PFC data through an interface, perform the following
operations:
Enable LLDP globally.
•
Enable LLDP and DCBX TLV advertising on the interface.
•
To enable LLDP and DCBX TLV advertising:
Step
1.
Enter system view.
2.
Enable LLDP globally.
Enabling LLDP and DCBX TLV advertising
Configuring APP parameters
Configuring PFC parameters
Configuring the DCBX version
Command
system-view
lldp global enable
249
Remarks
N/A
By default:
•
If the switch starts up with
empty configuration, LLDP
is disabled globally (initial
setting).
•
If the switch starts up with
the default configuration
file, LLDP is enabled
globally (factory default).
For more information about
empty configuration and the
default configuration file, see
Fundamentals Configuration
Guide.