HP 6125XLG Configuration Manual page 192

[DeviceB-mst-region] region-name example
[DeviceB-mst-region] instance 1 vlan 10
[DeviceB-mst-region] instance 2 vlan 20
[DeviceB-mst-region] revision-level 0
# Manually activate the MST region configuration.
[DeviceB-mst-region] active region-configuration
[DeviceB-mst-region] quit
# Configure Device B as the primary root bridge of MSTI 2.
[DeviceB] stp instance 2 root primary
# Globally enable the spanning tree feature.
[DeviceB] stp global enable
# Globally enable MVRP.
[DeviceB] mvrp global enable
# Configure port Ten-GigabitEthernet 1/1/5 as a trunk port, and configure it to permit VLANs 20 and
40.
[DeviceB] interface ten-gigabitethernet 1/1/5
[DeviceB-Ten-GigabitEthernet1/1/5] port link-type trunk
[DeviceB-Ten-GigabitEthernet1/1/5] port trunk permit vlan 20 40
# Enable MVRP on port Ten-GigabitEthernet 1/1/5.
[DeviceB-Ten-GigabitEthernet1/1/5] mvrp enable
[DeviceB-Ten-GigabitEthernet1/1/5] quit
# Configure port Ten-GigabitEthernet 1/1/6 as a trunk port, and configure it to permit all VLANs.
[DeviceB] interface ten-gigabitethernet 1/1/6
[DeviceB-Ten-GigabitEthernet1/1/6] port link-type trunk
[DeviceB-Ten-GigabitEthernet1/1/6] port trunk permit vlan all
# Enable MVRP on port Ten-GigabitEthernet 1/1/6.
[DeviceB-Ten-GigabitEthernet1/1/6] mvrp enable
[DeviceB-Ten-GigabitEthernet1/1/6] quit
# Configure port Ten-GigabitEthernet 1/1/7 as a trunk port, and configure it to permit all VLANs.
[DeviceB] interface ten-gigabitethernet 1/1/7
[DeviceB-Ten-GigabitEthernet1/1/7] port link-type trunk
[DeviceB-Ten-GigabitEthernet1/1/7] port trunk permit vlan all
# Enable MVRP on port Ten-GigabitEthernet 1/1/7.
[DeviceB-Ten-GigabitEthernet1/1/7] mvrp enable
[DeviceB-Ten-GigabitEthernet1/1/7] quit
# Create VLAN 20.
[DeviceB] vlan 20
[DeviceB-vlan20] quit
Configuring Device C
# Enter MST region view.
<DeviceC> system-view
[DeviceC] stp region-configuration
# Configure the MST region name, VLAN-to-instance mappings, and revision level.
182