HP 6125XLG Configuration Manual page 241
Blade switch layer 2 lan switching
Hide thumbs
Also See for 6125XLG:
- Layer 3 - ip routing configuration manual (492 pages) ,
- Command reference manual (466 pages) ,
- Configuration manual (414 pages)
Table of Contents
Advertisement
For more information about the display l2vpn vsi verbose command, see MPLS Command
Reference.
2.
Use the display l2vpn vsi verbose command on all BEBs to determine whether they are consistently
configured, especially the I-SID and B-VLAN.
PBB configurations on the BEBs should be consistent.
3.
Use the display vlan all command on all BCBs to determine the following:
Whether the B-VLAN on the BEBs is created on each BCB.
Whether the ports connecting the BEBs and BCBs are assigned to the B-VLAN.
All ports connecting the BEBs and BCBs must be assigned to the B-VLAN.
231
Advertisement
Table of Contents
