Safety Notes - Fujitsu PRIMERGY RX300 S4 Options Manual

Safety notes

3 Safety notes
I
The following safety notes are also provided in the "Safety notes and
other important information" manual.
This device complies with the relevant safety regulations for data processing
equipment.
If you have any questions about where you can set up the device, contact your
sales outlet or our customer service team.
V
CAUTION!
The actions described in this manual should only be performed by
technical specialists.
Repairs to the device that do not relate to CSS failures must only be
carried out by service personnel. Please note that unauthorized inter-
ference with the system will void the warranty and exempt the
manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Only transport the device in the original packaging or in packaging
that protects it from knocks and jolts.
RX300 S4
Options Guide 15