Fujitsu PRIMERGY RX300 S4 Options Manual page 10

Options and upgrade
I
– In a 6x3,5 HDD configuration these bays are then no longer available
for HDD modules.
– The magnetic tape drive or the RDX drive cannot be replaced during
operation.
LocalView module (alphanumeric system display)
The LocalView module provides you with the option of displaying system infor-
mation and hardware system faults alphanumerically. This is an intelligent
module with a micro-controller and its own memory, which functions indepen-
dently of the server system.
The LocalView module consists of an LCD display panel and a toggle switch,
both accommodated in a suitable mount. The mechanical mechanism used
allows the LCD display panel to be pulled out and open. Further information on
operating the display modes are provided in the documentation on the
LocalView module.
Customer Self Service (CSS)
The Fujitsu Siemens Computers Customer Self Service (CSS) concept enables
you to identify and replace the affected component yourself in the case of
certain error scenarios.
In the CSS concept, you can replace the following components yourself in the
event of an error:
– Hot-plug hard disk drives
– Hot-plug power supply units
– Hot-plug fans
– Memory modules
– Expansion cards
For information on replacing these components, see chapter „Hot-plug compo-
nents of the operating manual or the Options Guide for your Primergy RX300
S4 on the ServerBooks DVD.
CSS indicators on the control panel and on the back of the PRIMERGY server
provide you with information if a CSS event arises (for more information on the
behavior of these indicators, see operating manual and the "Customer Self
Service (CSS)" manual on the ServerBooks DVD).
You can also fit your server with a CSS Module which enables you to identify the
type of component affected by the error directly on the server (for more infor-
mation, see the "Customer Self Service (CSS)" manual on the
10 Options Guide
Introduction
RX300 S4