Fujitsu PRIMERGY RX300 S4 Options Manual page 28

Upgrading/replacing the main memory
Ê Insert the memory module in the mounting location and press it down until
the holders at the sides engage.
Figure 9: insert riser module
Ê Insert the riser module again.
Ê Push the riser module downward
Ê Insert the air duct, see
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
28
"Inserting air duct" on page
81.
Options Guide
Main memory
81.
RX300 S4