Fujitsu PRIMERGY RX300 S4 Options Manual page 50

Installing a LocalView module
Figure 31: Inserting the LocalView module
I
Carefully push in the LocalView module horizontally, so that the EMV
springs will not be damaged.
Ê Slide the LocalView module into the mounting location until it latches in
place.
I
Further information on operation and display modes is provided in the
documentation for the LocalView module.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
50
81.
Options Guide
Accessible drives
RX300 S4