Ribbon Take Up Gear Mechanism - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions

Ribbon Take Up Gear Mechanism

OPERATION:
The ribbon take-up gears are available as a set.
Tools Required
Description
Torx Driver
Torx Driver
Parts Required
Item Part Number
1 201-029-001
Ribbon Reduction Gear kit Replacement Instructions
1. Complete the drive belt replacement instructions in this procedure
2. Using common a T20 Torx Bit driver and E-clip removal tool release and replace the gears as shown in the following
Figures 1 and 2.
3. For installation reverse these steps
Description
Gear, Ribbon Reduction, Spare Kit, PM43
Figure 1
Gear, Ribbon Reduction, Spare Kit
Intermec Proprietary Document
Model
PM43,PM43C
Part Number
T10
T20
Figure 2
1
DOCUMENT NO.
SWIPM43x-000
55 of 70
Qty
1
PAGE
Page