Printhead Lift Sensor Assembly - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions

Printhead Lift Sensor Assembly

OPERATION:
Printhead lift sensor senses when the printhead lifted. This printhead lift sensor assembly is used on both PM43 and PM43c.
Tools Required
Description
Torx Driver
Torx Driver
Parts Required
Item Part Number
1 236-261S-130
2 1-994058-010
Printhead Lift Sensor Assembly Replacement
1. Remove the 2 torx screws securing the headlift sensor assembly. See Figure 1.
2. Unplug the sensor cable assembly from the MLB and lift the headlift sensor away
3. Reverse the procedure to install replacement headlift sensor assembly
Description
ASSY, CABLE, HEADLIFT SENSOR, Spare, PM43 (include 1-994058-010)
Screw MRT 3X10 FBZ (-5 lbf.in/6 kgf.cm)
Headlift Sensor Assembly
Intermec Proprietary Document
Model
PM43,PM43C
Part Number
T10
T20
2
Figure 1
DOCUMENT NO.
SWIPM43x-000
20 of 70
Qty
1
2
PAGE
Page