Tear Bar - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions

Tear Bar

OPERATION:
This is a customer replaceable part; no tooling is required for this operation.
Tools Required
Description
Torx Driver
Parts Required
Item Part Number
1 650-799S-001
2 1-994059-008
Tear Bar Replacement
1. Remove the 3 torx screws securing the tear bar against the bottom print mechanism assembly and remove the tear bar. See
Figure 1.
2. Reverse the procedure for re-installation.
Description
Tear Bar, Spare, PM43 (include torx screws 1-994059-008)
Screw, MRT 4x8 ZP, T20, (14 lbf.in/16 kgf.cm)
Intermec Proprietary Document
Model
PM43,PM43C
Part Number
T20
Figure 1
Tear Bar, Spare
DOCUMENT NO.
SWIPM43x-000
30 of 70
Qty
1
3
PAGE
Page