Symbol PPT 2800 series Product Reference Manual page 178

PPT 2800 Series Product Reference Guide
Setting
Auto Power-Off
Side Preference Drop-Down
Setting
A only The modem searches for a CDPD system on the "A" side only. For users
who do not roam, this selection can sometimes speed the registration
process, as the modem does not have to look on the "B" side as well
before it can register.
B only Same as "A only" except on the "B" side.
A Preferred The modem searches for a CDPD system on the "A" side first and attempt
registration on any system it finds. However, if the modem cannot register
on the "A" side, it then attempts to find service on the "B" side. For users
who roam, this setting would be appropriate if the home system was on the
"A" side.
B Preferred The modem searches for a CDPD system on the "B" side first and attempt
registration on any system it finds. However, if the modem cannot register
on the "B" side, it attempts to find service on the "A" side. For users who
roam, this setting would be appropriate if the home system was on the "B"
side.
Sleep Mode Drop-Down
Setting
Enabled The modem attempts to enter a low-power mode if it is not required to carry
out any communications with a Network. The modem may respond
sluggishly to the first communication request when it is required again.
Disabled The modem is not allowed to enter sleep mode.
10-12
When enabled, this shuts off the modem when the session is
disconnected.
Description
Description
Description