Symbol PPT 2800 series Product Reference Manual page 56

PPT 2800 Series Product Reference Guide
To perform a cold boot:
1. Remove the battery cover.
2. While holding down the Function button, use the tip of the stylus (or similar object
without a sharp tip) to gently press the reset button.
3. Replace the battery cover and press the Power button.
4. As the terminal initializes its unique Flash File system, the Symbol splash screen
displays for about a minute.
5. See Aligning the Screen
2-16
Function
Button
Figure 2-12. Cold Boot Buttons
on page 1-16 to perform an initial setup of the terminal.
Reset
Button