Sending The Hex Image; Saving The Script; Connect The Terminal And Development Pc; Begin The Send In Tcm - Symbol PPT 2800 series Product Reference Manual

PPT 2800 Series Product Reference Guide

Sending the Hex Image

Once the hex file is built, you are ready to download it to the terminal. A Hex image
download requires both TCM and a program loader stored on the terminal. The terminal
comes with a program loading utility, Initial Program Loader (IPL), stored in the terminal's
write-protected flash. To run IPL, the terminal must be inserted in a cradle or connected to
a development PC by direct serial connection.

Saving the Script

If you made changes to the script since last saving it, save the script again.

Connect The Terminal and Development PC

To send the hex file to the terminal, first link the terminal and development PC by one of the
following devices:
• Direct serial link
• Cradle (refer to
cradle).

Begin the Send in TCM

In TCM on the PC:
1. Select the script.
2. From the File menu, choose Load Terminal,
OR
On the toolbar, choose
12-12
Chapter 1, Getting Started
. The Load Terminal screen displays.
for more information on setting up the