Symbol PPT 2800 series Product Reference Manual page 137

Spectrum24 Network Configuration
Options Property Page
The Options page controls system sounds, whether specified settings are temporary, and
the NICTT exit option.
Figure 9-5. Options Property Page
Enable System Sounds
You can enable or disable NICTT system sounds. NICTT uses standard wav-table sounds
supplied by the Windows operating system. NICTT plays a wav file when it detects the PPT
2842 roaming between Spectrum24 APs, and also during a transmission test.
Temporary Settings
Check These settings are only temporary to use temporary values only until the computer
system reboots. When not checked, any value entered in NICTT is saved and used even
after the system is rebooted.
Exit If Adapter Is Not Found
Specify the amount of time (1 to 5 minutes) NICTT waits for the adapter to be located in the
network before exiting.
9-9