Symbol PPT 2800 series Product Reference Manual page 177

Configuration Screen
Figure 10-8. Modem Manager Configuration Screen
On the Config tab, you can edit configuration settings. The following settings are available:
Setting
IP Address
Primary DNS
Secondary DNS
Side Preference
Sleep Mode
This is the current IP address of the modem. Tap to enter a
new IP address.
This is the current Primary DNS address of the modem. Tap
to enter a new DNS address.
This is the current Secondary DNS address of the modem.
Tap to enter a new DNS address.
Configure the side preferences for the modem. All CDPD
systems are categorized into "A" systems or "B" systems.
This setting determines how the modem searches for a
CDPD system among the two system category choices. See
Side Preference Drop-Down
Allows or disallows the modem to enter the low-power mode.
This feature only functions on Wireless IP networks that
support it. See Sleep Mode Drop-Down
detailed information.
Wireless Wide Area Network Configuration
Description
on page 10-12.
on page 10-12 for
10-11