Additional Connections; Connecting A Television With S Video Terminals; Connecting A Television With Component Video Terminals; Connecting A Stereo Amplifi Er - Panasonic DIGA DMR-BW750 Operating Instructions Manual

Additional connections

Leave "Yellow" unconnected.
Connecting a television with S VIDEO
terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Television's rear panel
AUDIO I N
R
Audio/Video
cable
(included)
P
ONENT
O OUT
This unit's rear panel
Connecting a television with
COMPONENT VIDEO terminals
Television's rear panel
AUDIO IN
R L
Component
Audio/Video
video cable
cable
(included)
10BASE-T/
100BASE-TX
This unit's rear
panel
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡119) and provide a purer picture than the S
VIDEO OUT terminal.
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Required setting
"Component Resolution" setting in the Setup menu (➡ 93)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Set "Component Resolution" in the Setup
menu to "576i/480i" (➡ 93) and "HDMI Video Mode" to "Off"
(➡ 92) if you are concerned about it. This is the same for multi
system televisions using PAL mode.
DO NOT
COMPONENT
VIDEO OUT
Progressive output
This unit
V IDEO S VIDEO
IN
L I N
S Video
cable
DIGITAL
R P Y
B
AUDIO OUT
(PCM/
BITSTREAM)
COMPONENT
VIDEO IN
P P Y
R B
DIGITAL
P P Y
R B
AUDIO OUT
COAXIAL
COMPONENT
(PCM/
VIDEO OUT BITSTREAM)
R- R-AUDIO-L L VIDEO S VIDEO OPTICAL
CRT
COMPONENT
VIDEO IN
Connecting a stereo amplifi er
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Amplifi er's rear panel
AUDIO I N
R L
P
R
COMPONENT
VIDEO OUT
R-AUDIO-L
Connecting an amplifi er with a digital
input terminal
Required setting
"Digital Audio Output" in the Setup menu (➡ 90)
When this unit is connected to an amplifi er with an optical digital
audio cable or coaxial cable and connected to a television with an
HDMI cable, you can enjoy the highest quality of audio from the
disc by setting "HDMI Audio Output" to "Off" in the Setup menu
(➡92). In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
■ With OPTICAL
You cannot use DTS Digital Surround decoders not suited to DVD.
Amplifi er's rear panel
Optical digital audio cable
Do not bend sharply when
connecting.
DIGITAL
P Y
B
AUDIO OUT
(PCM/
BITSTREAM)
This unit's rear panel
VIDEO S VIDEO
■ With COAXIAL
Amplifi er's rear panel
Coaxial cable
DIGITAL
P B Y
AUDIO OUT
(PCM/
This unit's rear panel
O-L VIDEO
Audio cable
DIGITAL
P Y
B
AUDIO OUT
(PCM/
BITSTREAM)
This unit's rear panel
VIDEO S VIDEO
OPTICAL IN
Insert fully with
this side up.
COAXIAL
OPTICAL
COAXIAL IN
COAXIAL
BITSTREAM)
S VIDEO OPTICAL
RQT9428
99