Connections And Settings; Connecting To A Tv; Connecting To An Amplifier/Receiver - Panasonic DMP-BDT271 Owner's Manual

Connecting to a TV

Connections and settings

Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power outlet.
[BDT271/270] [BD903/93]
[BDT271/270]
[BD903/93]
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic's HDMI cable. When outputting 1080p or
use HDMI cables 5.0 meters (16.4 ft.) or less.
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.

Connecting to an amplifier/receiver

[BDT271/270]
[BD903/93]
[BDT271/270] [BD903/93]
≥ Set "Digital Audio Output" (
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV,
[BDT271/270]
then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up
to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of "(ARC)"
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV's sound through the amplifier/receiver.
Connections and settings
AC adaptor (supplied)
AC power supply cord
(supplied)
HDMI cable
24).
- 10 -
HDMI IN
HDMI cable
To an AC outlet
[BDT271/270]
32) even when turned off in standby mode. For
HDMI OUT
HDMI IN
(ARC)
Amplifier/receiver
24p (4K) signal, please
HDMI cable
HDMI IN
(ARC)