Connections And Settings; Connecting To A Tv - Panasonic DMP-BDT570 Operating Instructions Manual

Connecting to a TV

Connections and settings

Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Insert the AC mains lead up to A, a point just before the round hole.
To a household mains
socket
AC mains lead
(supplied)
≥ Use HDMI AV OUT MAIN terminal.
≥ To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
To enjoy images in 4K (50p/60p), you need a High Speed HDMI Cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic's HDMI cable.
≥ To enjoy image in 4K (50p/60p), set "4K ( 50p/60p ) Output" to "Automatic". (
≥ In case problems occur for the playback of content such as no picture or picture distortion, check the
HDMI cable, related connections and the compatibility of TV video input.
To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device.
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Connections and settings

HDMI cable
39) even when turned off in standby mode. For
- 10 -
HDMI IN
28)