Table of Contents
Advertisement
Operation during Recording
Check the recording
programme
Display the recording
programme on the TV
screen
To stop recording
To pause recording
Switch the input
Switch to other channel
Perform 2 programmes
simultaneous recording
Press [STATUS
].
e.g., while 2 programmes simultaneous recording
It is necessary to display the recording programme onto the TV screen to perform operations such as
pause.
If the input was switched:
Press [INPUT SELECT].
If the channel was switched: Press [ 1 2 CH].
If the drive was switched:
Press [DRIVE SELECT].
It is necessary to display the programme you want to stop on the TV screen. (➡ above)
Press [
].
g
From the start to the end of the recording is called one title.
It is necessary to display the programme you want to pause on the TV screen. (➡ above)
Press [
].
h
Press again to restart recording.
You can also press [ * REC] to restart.
(Title is not split into separate titles.)
If paused while recording in DR mode, the paused part may become a still picture for a moment during
playback of that programme.
Press [INPUT SELECT].
Press [
CH].
1 2
Record other programme with steps 1–5 on page 23.
One of the 2 programmes needs to be digital broadcasting recorded with DR mode.
Channel switch / input switch while performing 2 programme simultaneous recording will switch
between the 2 recording programmes.
Recording programme
displayed on the TV screen
Recording programme not
displayed on the TV screen
"REC1" and "REC2" will light
HDD
REC1
090 NINE HD
002 ABC TV REC2
REC1
REC2
RQT9428
33
Advertisement
Table of Contents
