Still Pictures Operation - Panasonic DIGA DMR-BW750 Operating Instructions Manual

Still pictures operation

After performing steps 1–3 (➡ 64)
Copy to Album
HDD BD-RE RAM
Copy to New Album
HDD BD-RE RAM
Copy to Disc
HDD
Copy to HDD
BD-RE RAM
Change Date
HDD BD-RE RAM
(Pictures by Date only)
Enter Album Name
HDD BD-RE RAM SD
(Album View only)
Set up Protection
Cancel Protection
HDD BD-RE RAM SD
(Album View and Picture (JPEG) View only)
Delete
Delete Album
Delete Pictures
HDD BD-RE RAM SD
Multiple editing is possible.
[Copy to Album, Copy to New Album, Change Date : Only when the "Picture (JPEG) View" screen is displayed]
Note
Timer recordings do not start when performing "Copy to Album", "Copy to New Album", "Change Date", "Copy to Disc" or "Copy to HDD".
Copy the selected album, date or pictures to an existing album.
1 Press [ w , q ] to select "Start" and press [OK].
2 Press [ e , r , w , q ] to select the destination album and press [OK].
The destination album with protect setting cannot be copied to.
Copy the selected album, date or pictures to new album.
1 Press [ w , q ] to select "Start" and press [OK].
2 Press [OK].
3 Press [ w , q ] to select "Yes" or "No" and press [OK].
If "Yes" is selected:
You can give a name to the album. (➡ 76, Entering text)
If "No" is selected:
Date of the fi rst recorded picture in the album becomes the album name automatically. (If
there is no information about the recording date, it will become "--.--.----".)
Press [ w , q ] to select "Start" and press [OK].
Change the date of a folder and move the picture in it into the folder of the changed date.
1 Press [ w , q ] to select the item and press [ e , r ] to change.
2 Press [OK].
Date folder of the original is maintained. Delete it if unrequired.
If there is no folder with the changed date, a new folder will be created.
You can give a name to the album.
(➡ 76, Entering text)
Album names input using this unit may not be displayed on other equipment.
If set, this will protect the still picture or album from accidental deletion.
Press [ w , q ] to select "Yes" and press [OK].
The lock symbol appears when the still picture or album is protected.
Even if the protection setting is used by this unit to protect an album, the album may be
deleted by another unit.
Press [ w , q ] to select "Delete" and press [OK].
Once deleted, the recorded contents are lost and cannot be restored. Make certain before
proceeding.
If there is a fi le other than DCF format or other folder exists in the date or
BD-RE RAM SD
album, only the pictures will be deleted, and the date or the album itself will not be deleted.
RQT9428
65