Additional Connections; Connecting A Television With S Video Terminals; Connecting A Television With Component Video Terminals; Connecting A Stereo Amplifi Er - Panasonic Diga DMR-BW850 Operating Instructions Manual

Additional connections

Connecting a television with S VIDEO
terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Television's rear panel
Audio cable
Connecting a television with
COMPONENT VIDEO terminals
AUDIO IN
R L
Audio cable
10BASE-T/
100BASE-TX
This unit's rear
panel
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 119) and provide a purer picture than the S
VIDEO OUT terminal.
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Required setting
"Component Resolution" setting in the Setup menu (➡ 91)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Set "HDMI Video Mode" in the Setup menu
to "Off" and "Component Resolution" in the Setup menu to
"576i/480i" if you are concerned about it (➡ 91). This is the same for
multi system televisions using PAL mode.
COMPONENT
VIDEO OUT
This unit
RQT9433
98
S VIDEO
AUDIO I N V IDEO
R L I N IN
S Video
cable
DIGITAL
P P Y
R B
AUDIO OUT
ONENT
(PCM/
O OUT
BITSTREAM)
This unit's rear panel
Television's rear panel
COMPONENT
VIDEO IN
P R P B Y
Component
video cable
P
R P B Y
COMPONENT
VIDEO OUT
R- L
R-AUDIO-L VIDEO
CRT
DO NOT
Progressive output
COMPONENT
VIDEO IN
Connecting a stereo amplifi er
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Connecting an amplifi er with a digital
input terminal
Required setting
"Digital Audio Output" in the Setup menu (➡ 89)
When this unit is connected to an amplifi er with an optical digital
audio cable or coaxial cable and connected to a television with an
HDMI cable, you can enjoy the highest quality of audio from the
disc by setting "HDMI Audio Output" to "Off" in the Setup menu
(➡ 91). In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
■ With OPTICAL
You cannot use DTS Digital Surround decoders not suited to DVD.
DIGITAL
AUDIO OUT
COAXIAL
(PCM/
BITSTREAM)
Amplifi er's rear panel
S VIDEO OPTICAL
Optical digital audio cable
Do not bend sharply when
connecting.
This unit's rear panel
■ With COAXIAL
Amplifi er's rear panel
This unit's rear panel
Amplifi er's rear panel
AUDIO I N
R L
Audio cable
P DIGITAL
R P B Y
AUDIO OUT
COMPONENT
(PCM/
VIDEO OUT BITSTREAM)
This unit's rear panel
R-AUDIO-L VIDEO S VIDEO
OPTICAL IN
Insert the cable so its
shape fi ts correctly into
the terminal.
DIGITAL
P B Y
AUDIO OUT
COAXIAL
(PCM/
BITSTREAM)
VIDEO S VIDEO OPTICAL
COAXIAL IN
Coaxial cable
DIGITAL
P Y
B
AUDIO OUT
COAXIAL
(PCM/
BITSTREAM)
O-L VIDEO S VIDEO OPTICAL