Recording Television Programmes; Hdd; When Recording Digital Broadcast With Subtitle Or Multiple Audio; To Specify A Time To Stop Recording - Panasonic DIGA DMR-BW750 Operating Instructions Manual

Recording television programmes

Refer to "Important notes for recording" (➡ 28)
and "Advanced recording" (➡ 30) for detailed
information.
TV
DRIVE
SELECT
AV
DRIVE SELECT
1 2
abc
4 5
Numbered
ghi jkl
buttons
7 8
p
qrs tuv
0
DEL
SKIP
g STOP
STATUS
OPTION
REC REC MODE
* REC
TEXT STTL
This operation will only record to HDD.
To record to a disc (➡ 25)
Preparation
Turn on the television and select the appropriate video input to suit
the connections to this unit.
Turn on this unit.
1
Press [DRIVE SELECT] to select the
HDD drive.
The HDD indicator lights up on the unit's display.
2
Press [INPUT SELECT] a few times
and select "TV".
3
Press [ 1 2 CH] to select the channel.
To select with the numbered buttons:
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
4
Press [REC MODE] to select the
recording mode.
It will switch every time it is pressed.
e.g.,
Recording Mode Rcording Mode
It can be recorded
Recording Mode Remain
with the same quality
DR 71:52
HG 83:18
HX 124:57
HE 187:53
HL 251:41
XP 112:37
SP 225:15
LP 450:36
EP 898:34
OK
RETURN
It will switch when the display is turned off.
(It will switch faster by pressing [OK])
Recording modes (➡ 30)
To record 2 programmes simultaneously (➡ 31)
VOL
CH
PAGE
3
def
1 2 CH
CH
6
mno
9
w
xyz
MANUAL SKIP
INPUT
INPUT SELECT
SELECT
SLOW/SEARCH
h
PAUSE
PLAY/x1. 3
EXIT
OK
OK
RETURN
CREATE
CHAPTER
TIME SLIP PROG/CHECK
REC MODE
AUDIO DISPLAY
of the broadcast. (➡ 7)

HDD

5
Press [ * REC] to start recording.
Recording will take place on open space on the HDD. Data
will not be overwritten.
Recording mode cannot be changed while recording a
programme.
When [ * REC] is pressed while a drive other than the HDD
is selected, it will automatically switch to HDD and start the
recording.
6
To stop recording
Press [ g ].
■ To pause recording
Press [ h ].
Press again to restart recording.
You can also press [ * REC] to restart.
(Title is not split into separate titles.)
When recording digital broadcast with
subtitle or multiple audio
If a programme to record has subtitle or multiple audio, there are
following differences depending on the recording modes.
When recording in DR mode
All subtitles and multiple audio are recorded. It is possible to
switch them after recording.
When recording in HG, HX, HE, HL, XP, SP, LP, or EP modes
Subtitles cannot be recorded. Multiple audio will be recorded with
the contents selected when the recording starts, and the switching
cannot be done after the recording.
Select the audio to be recorded with "Audio Mode for Digital
Broadcast" in the Setup menu prior to the recording. (➡ 91)

To specify a time to stop recording—

One Touch Recording

During recording
Press [ * REC] on the main unit to select the recording
time.
You can specify up to 4 hours later.
The unit display changes as shown below.
OFF0:30 OFF1:00
Counter (cancel)
This does not work during timer recordings (➡ 24, 34) or while
using Flexible Recording (➡ 32).
The unit turns off automatically after the time to stop recording is
reached.
To cancel
Press [ * REC] on the main unit several times until the counter
appears.
The time to stop recording is cancelled; however, recording
continues.
To stop recording
Press [ g ].
"REC1" or "REC2" will light
REC1
OFF1:30 OFF2:00
OFF4:00 OFF3:00
RQT9428
23