Copying Still Pictures; Copying All The Still Pictures On The Usb Memory; Copy All Pictures; Copying New Still Pictures On The Sd Card-Copy New Pictures - Panasonic DIGA DMR-BW750 Operating Instructions Manual

Copying still pictures

HDD BD-RE RAM USB SD
Pictures copied from SD card and USB memory will be
categorised according to the shooting date. Pictures without
shooting date will be categorised using the creation date.
You cannot copy pictures recorded to DVD-R, DVD-R DL, CD-R/
CD-RW or USB memory.
If the space on the destination drive runs out or the number of
fi les/folders to be copied exceeds the maximum (➡ 115), copying
will stop partway through.
You cannot copy the information about the picture rotation.
Timer recording will not start while copying still pictures.
Copying all the still pictures on the
USB memory—Copy All Pictures
USB HDD
1
While stopped
Insert the USB memory.
The menu is automatically displayed.
USB device
Copy Video ( AVCHD )
Copy Video ( MPEG2 )
Play Pictures ( JPEG )
Copy Pictures ( JPEG )
Play / Copy Music ( MP3 )
USB device is inserted.
Display contents differ depending on what is recorded in
each media.
2
Press [ e , r ] to select "Copy Pictures
(JPEG)" and press [OK].
Copy All Pictures ( JPEG )
Copy from
Copy to
Copy all pictures ( JPEG ) by date.
Copy
OK
RETURN
3
Press [ w , q ] to select "Copy" and
press [OK].
will be displayed on the Pictures by Date screen of the
Direct Navigator for the added pictures.
To stop copying
Press and hold [RETURN ] for 3 seconds.
Note
The structure of folders on the USB memory may not be the same
at the copy destination.
Copying new still pictures on the SD
card—Copy New Pictures
SD HDD
This unit saves information about imported still pictures. Therefore, if
still pictures are imported from the same SD card, then only new
still pictures will be imported.
1
While stopped
Insert the SD card.
The menu is automatically displayed.
SD Card
Play Video ( AVCHD )
Copy Video ( AVCHD )
Copy Video ( MPEG2 )
Play Pictures ( JPEG )
Copy Pictures ( JPEG )
SD card is inserted.
Display contents differ depending on what is recorded in
each media.
RQT9428
66
OK
RETURN
USB
HDD
Cancel
OK
RETURN
2
Press [ e , r ] to select "Copy Pictures
(JPEG)" and press [OK].
Copy New Pictures ( JPEG )
Copy from
SD CARD
Copy to HDD
Copy added pictures ( JPEG ) by date.
Copy Cancel
OK
RETURN
3
Press [ w , q ] to select "Copy" and
press [OK].
Protection of the card is
– Set: Copy will start
– Not set: Go to step 4
4
Press [ w , q ] to select "Copy & Delete"
or "Copy Only" and press [OK].
If "Copy & Delete" is selected
Copied pictures in the SD card will be deleted after copying.
If "Copy Only" is selected
Pictures will not be deleted.
will be displayed on the Pictures by Date screen of the
Direct Navigator for the added pictures.
To stop copying
Press and hold [RETURN ] for 3 seconds.
Note
This unit saves the information on up to 12,000 still pictures and
30 SD cards. If additional still pictures are imported, then the older
information will be deleted.

Copying using the copying list

HDD BD-RE RAM SD
SD BD-RE RAM
USB HDD BD-RE RAM
1
While stopped
Press [FUNCTION MENU].
2
Press [ e , r ] to select "Copy" and
press [OK].
Copy
Cancel All
Source
SD CARD
Copy Direction
1
SD CARD HDD
Destination HDD
Copy Mode
2
PICTURE High Speed
Create List
3
0
Start Copying
Select the copy direction.
RETURN
If you are not going to change the registered list press [ r ]
several times (➡ step 6).
3
Set the copy direction.
If you are not going to change the copying direction, press
[ r ] (➡ step 4).
1 Press [ e , r ] to select "Copy Direction" and press [ q ].
2 Press [ e , r ] to select "Source" and press [OK].
3 Press [ e , r ] to select the drive and press [OK].
4 Press [ e , r ] to select "Destination" and press [OK].
5 Press [ e , r ] to select the drive and press [OK].
The same drive as the copy source cannot be copied.
6 Press [ w ] to confi rm.
4
Set the copy mode.
If you are not going to change the recording mode, press
[ r ] (➡ step 5).
1 Press [ e , r ] to select "Copy Mode" and press [ q ].
2 Press [ e , r ] to select "Format" and press [OK].
3 Press [ e , r ] to select "PICTURE" and press [OK].
"Recording Mode" is automatically set to "High Speed".
4 Press [ w ] to confi rm.