Dv Automatic Recording; Recording Via Av2 Input - Panasonic DIGA DMR-BW750 Operating Instructions Manual

DV Automatic Recording

HDD BD-RE BD-R RAM -R -RW(V) +R +RW
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal (➡ 58).
2 Turn on the main unit.
When the output signal from the external equipment is NTSC,
change "TV System" to "NTSC" in the Setup menu (➡ 92).
1
Turn on the DV equipment, and pause
play at the point you want recording
to start.
The following screen appears.
DV Automatic Recording
Record from the DV unit?
Rec to HDD
Rec to Blu-ray Disc/DVD
OK
RETURN
When the screen is not displayed
After performing step 1
1 Press [FUNCTION MENU].
2 Press [ e , r ] to select "Others" and press [OK].
3 Press [ e , r ] to select "DV Automatic Recording" and
press [OK].
➡ Go to step 2
2
Press [ e , r ] to select "Rec to HDD" or
"Rec to Blu-ray Disc/DVD" and press
[OK].
It may take a while for the next screen to display while
preparing to record.
3
Press [REC MODE] to select the
recording mode.
DR, HG, HX, HE, HL, FR mode cannot be selected.
4
Press [ w , q ] to select "Start" and
press [OK].
Recording starts.
To stop recording
Press [ g ].
Note
Only one piece of DV equipment (e.g., digital video camcorder)
can be connected to the unit via the DV input terminal.
It is not possible to operate the unit from the connected DV
equipment.
The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
The DV equipment name may not be shown correctly.
Depending on the DV equipment, the images or audio may not be
input properly.
The date and time information on the tape of the DV equipment
will not be recorded.
It may not be able to record after repeating about 30 times of
-R
step 2 or recording or editing.
After fi nalising, chapters for every 5 minutes will be
-R -RW(V)
created.
+R After fi nalising, chapters for every 8 minutes will be created.
After creating top menu, chapters for every 8 minutes will be
+RW
created.
If the DV Automatic Recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording (➡ 58).

Recording via AV2 input

BD-RE BD-R RAM -R -RW(V) +R +RW
It is possible to record to disc from equipment connected to the AV2
input terminals.
Recording mode is FR mode (➡ 30).
Preparation
Press [DRIVE SELECT] to select the drive. Select "BD" for DVD.
When the output signal from the external equipment is NTSC,
change "TV System" to "NTSC" in the Setup menu (➡ 92).
1
While stopped
Press [FUNCTION MENU].
2
Press [ e , r ] to select "Others" and
press [OK].
3
Press [ e , r ] to select "Recording via
AV2 input" and press [OK].
It may take a while for the next screen to display while
preparing to record.
Recording via AV2 input
Please set recording time. Record in FR mode.
Maximum recording time
7 hour 53 min.
Set recording time
8 Hour 00 Min.
OK
Recording will stop when
RETURN
timer recording starts.
4
Press [ w , q ] to select "Hour" and
"Min." and press [ e , r ] to set the
recording time.
You can also set the recording time with the numbered
buttons.
5
Start play on the other equipment.
6
When you want to start recording
Press [ w , q ] to select "Start" and
press [OK].
To exit the screen without recording
Press [RETURN ].
To stop recording partway
Press [ g ].
To show the remaining time
Press [STATUS ].
Note
It may not be able to record after repeating about 30 times of
-R
step 3 or recording or editing.
After fi nalising, chapters for every 5 minutes will be
-R -RW(V)
created.
After fi nalising, chapters for every 8 minutes will be created.
+R
After creating top menu, chapters for every 8 minutes will be
+RW
created.
Start Cancel
RQT9428
59