Table of Contents
Advertisement
You can enjoy high-quality picture by changing the connection between this unit and your TV.
Connecting to a TV with an HDMI (High Defi nition Multimedia Interface) cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Defi nition Television), the output can be switched to
1080p, 1080i or 720p HD video.
This unit incorporates HDMI
TM
Video sources converted to 1920 × 1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true,
native 1080p full-HD sources. See dealer for details.
Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
Regarding VIERA Link "HDAVI Control
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the "HDAVI Control" function, linked operations would be
possible. [➡ 78, Linked operations with the TV (VIERA Link "HDAVI Control
Non-HDMI-compliant cables cannot be utilised.
It is recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
HDMI IN
HDMI cable
RF OUT
HDMI AV OUT
This unit's rear panel
Note
If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (➡ 118)
and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
You cannot connect this unit to DVI devices that are incompatible with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
(V.1.3a with Deep Colour, x.v.Colour
" function
TM
Television's rear
panel
RF IN
10BASE-T/
100BASE-TX
, High Bit rate Audio) technology (➡ 118, 119).
TM
")]
TM
Required setting
Set "HDMI Video Mode" and "HDMI Audio Output"
to "On" (➡ 92).
(The default setting is "On".)
DIGITAL
P
P
Y
R
B
AUDIO OUT
COAXIAL
COMPONENT
(PCM/
VIDEO OUT
BITSTREAM)
R-AUDIO-L
VIDEO
S VIDEO
OPTICAL
RQT9428
17
Advertisement
Table of Contents
