Table of Contents
Advertisement
Editing titles
Title operations
After performing steps 1–4 (➡ 46)
Title
Compression
HDD
(Converting the recording
mode)
RQT9428
48
Title Compression is a function to convert the recording mode of the title in DR mode. The converted title will
be copied to HDD. It will take about the same time as playback of the title to convert the recording mode.
1 Press [ e , r ] to select "Recording Mode".
2 Press [ w , q ] to select the recording mode and
press [ r ].
3 Press [ w , q ] to select when to start the
conversion.
"Now"
Conversion begins immediately after
step 5.
Recording and playback are not
available during conversion. Note also
that Timer recording will not be
performed during conversion.
"During standby"
The conversion will be performed a short time after switching off the power in
a time slot for which no scheduled recording is set. If the power is switched on
during the conversion, the conversion will be cancelled, and start from the
beginning when the power is next switched off.
4 Press [ e , r , w , q ] to select "Set" and press [OK].
5 To begin the conversion "Now":
Press [ w , q ] to select "Start" and press [OK].
To cancel a conversion that is in progress
Press and hold [RETURN ] for more than 3 seconds.
To begin the conversion "During standby":
Press [OK].
To remove a conversion setting
After performing steps 1–4 (➡ above)
Press [ w , q ] to select "Yes" and press [OK].
Conversion begins soon after the power is switched off.
"COPY" on the unit's display remains lighted during conversion. [Only when "Unit's Display" in the Setup
menu is set to "Bright" (➡ 91).]
Note
To use "Title Compression", the HDD need enough storage capacity. Please make space available on the
HDD.
The size of the converted programme may increase for some combinations of programme and recording
mode.
Recording mode conversion is paused when the power is turned on while the recording mode is converting
with power turned off. Conversion will start from the beginning again once the power is turned off.
The original programme remains after conversion.
The converted version of a programme including multiple video and audio content will contain only single
video and audio content. The "Audio Mode of Digital Broadcast" setting in the Setup menu (➡ 91) is applied.
Subtitles will not display anymore once a title with subtitles is converted.
When converting to XP mode, select the audio to record with "Audio Mode for XP Recording" before
converting the recording mode. (➡ 91)
Select the audio to record when converting to "HG", "HX", "HE", or "HL" modes. (➡ 89, Audio Channels for
HG/HX/HE/HL Recording)
In titles with the Auto Renewal Recording function (➡ 35) set, a programme may be unintentionally
converted while in "During standby". So it is recommended to convert the recording mode by selecting
"Now".
If converted to the "HG", "HX", "HE", or "HL" mode, an image of the aspect ratio 4:3 becomes one of the
aspect ratio 16:9 with the side panel. (➡ 82)
Recording Mode
Timing
When "New title can be made
in standby" is displayed in the
DIRECT NAVIGATOR, the
conversion has not fi nished.
Title Compression
Compress the selected title by changing its recording
mode.
HX -- Normal Quality (HD)
During standby
Set
Cancel
RETURN
DIRECT NAVIGATOR
Grouped Titles
HDD
Time Remaining 45:54 DR
VIDEO PICTURE MUSIC
Date Channel
Time
Title Name
Titles
25.05
Born And Bred: A Wrathful
2
AV2
12:36
01.01
1:35
1
AV1
1
Rec time
0:00(DR)
New title can be
made in standby.
Not viewed
Page 01/01
OPTION
Select
OK
RETURN
VIDEO
PICTURE
MUSIC
Advertisement
Table of Contents
