Remarks; Display On The Control Panel Screen - Ricoh G190 Service Manual

Hide thumbs Also See for G190:

Table of Contents

Service Program Mode

5.1.2 REMARKS

Since the maximum number of characters which can be displayed on the control panel

screen is limited (12 or 17 characters), the description of SP modes displayed on the

screen needs to be abbreviated. The following are the major abbreviations used for the SP

modes for which the full description is over 12 or 17 characters.

1. Paper Type

N: Plain paper 1, N2 or Normal 2: Plain paper 2 (plain & recycled)

TC: Thick paper, Thick 1: Thick paper 1, Thick 2: Thick paper 2

TN: Thin paper

SP: Special paper

2. Color Mode [Color]

[K]: Black in B&W mode

[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode

[YMC]: Only for Yellow, Magenta, and Cyan

[FC], [Cl]: Full Color mode

[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full color mode

3. Process Speed

LS: Low speed xx

RS: Regular speed xxx

HS: High speed xxx

As shown in the following table, the process speed (mm/s) depends on the print mode

(B&W or Color), resolution, and/or type of paper selected. Some SP mode settings depend

on the process speed.