Printer Installation
PRINTER INSTALLATION
1.2.3 INSTALLATION PROCEDURE
Remove the tape from the development units before you turn the main switch on.
The development units can be severely damaged if you do not remove the tape.
Keep the shipping retainers after you install the machine. You may need them in
the future if you transport the machine to another location.
Unpacking
When lifting the machine, use the inside grips on both sides of the machine.
If not, the machine could be dropped. This may cause an injury and may damage
the machine.
Place no objects to the left or on the cover.
1.
Remove the plastic bag.
2.
Lift the machine with two people by using the inset grips on both sides of the machine.
Do not remove the tapes before placing the machine.
Lower the machine slowly and carefully, so as not to pinch your hands.
3.
Remove the tape from the printer.
SM
1-4
G190