Table of Contents
Advertisement
Adjustments
Those saved in the previous adjustment: Controller SP 1101 ToneCtlSet - Tone (Prev)
The factory settings: Controller SP 1101 ToneCtlSet - Tone (Factory).
Adjustment Procedure
1.
Enter the controller service mode.
2.
Use the down arrow key to select Controller SP 1102 "ToneCtlSet". Then press the
Enter key.
3.
Use the up/down key to select the mode you want to calibrate, Then press the Escape
key until you get back to the controller service mode menu.
4.
Use the down arrow key to select Controller SP 1103 "PrnColorSheet". Then press the
Enter key.
5.
Use the up/down key to select Controller SP 1103 001 "ToneCtlSheet" (normally this is
displayed by default). Then press the Enter key.
6.
When "Execute?" shows, press the Enter key to print out the "color calibration test
sheet".
7.
Press the Escape key 2 times to exit from the menu when "Execute OK" shows. (You
return to Controller SP 1103 "PrnColorSheet" in the controller service menu.)
8.
Use the down arrow key to select Controller SP 1104 "ToneCtlValue". Then press the
enter key.
9.
Use the up/down arrow key to select the setting you want to adjust. Then press the
enter key. The three digits in the display (example '016') indicate a position on the color
calibration test sheet.
G190
3-48
SM
Advertisement
Table of Contents
Troubleshooting
