Siemens sinumerik 840d sl Configuration Manual page 84

Configuring variables
6.3 Configuring GUD tags
Procedure
To make the DEF files of the NCU available to the TIA Portal project and to create a user
database, follow these steps:
1. On the PG/PC, select "Programs > Siemens Automation > SINUMERIK > GUD Tool" in
the Windows Start menu.
"WinCC import NC userdata" GUD tool starts.
Figure 6-6
2. In the "TIA Portal project selection" input box, select the project (*.ap* file) in which the
generated user database and the GUD user definition files should be saved.
3. In the "GUD definition files" input box, select the directory that contains the GUD user
definition files. For example, this could be a USB flash drive with the copied DEF files
(MGUD.DEF, UGUD.DEF, GUD4.DEF, GUD5.DEF, etc.) of the NC.
4. Click "Start".
84
"WinCC import NC userdata" GUD tool
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014