Enable Project Languages - Siemens sinumerik 840d sl Configuration Manual

Configure the language settings

10.2 Enable project languages

10.2 Enable project languages
Introduction
The project languages are set in the "Project languages" editor. You define which project
language is to be the reference language and which the editing language.
Enable project languages
1. Click on the arrow to the left of "Languages & resources" in the project tree.
The lower-level elements will be displayed.
2. Double-click on "Project languages".
The possible project languages will be displayed in the working area.
3. Enable the relevant project languages.
Note
Copying multilingual objects
The copies of multilingual objects to a different project only include text objects in the
project languages which are activated in the target project. Activate all project languages
in the target project to include the corresponding text objects when transferring the copy.
Disabling project languages
1. Disable the languages which are not relevant for the project.
136
NOTICE
If you disable a project language, all text and graphic objects you have already created
in this language will be deleted from the current project.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014