Siemens sinumerik 840d sl Configuration Manual page 115

Operation of the "NC part program" display object at runtime
The following figure shows the "NC part program" display object during configuration.
Figure 8-1
During the runtime, command buttons can be used to:
Table 8- 1
Element
Current path name
List box below "Current path name"
Selected channel
Click or touch a directory name to change to the selected directory. The new path name is
displayed below the "Current path name" and the subdirectories are displayed in the list box.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
"NC part program" display object
Command buttons for the display object
8.2 "NC part program" display object
Function
The path of the opened directory is displayed, e.g. MPF, SPF.
Part program names and directories are displayed line-by-line
in the list.
Select in the list box the directory to be opened or the required
program.
Navigating and selecting in the list directory
Update directories in the list box
Select the selected part program / workpiece on the NC for
editing.
Enter the NC channel as integer in the "Selected channel" text
box.
Configuring screen objects
115