Selectncpartprogram - Siemens sinumerik 840d sl Configuration Manual

9.5.10

SelectNCPartProgram

Description
You may implement some functions of part programs with the "NC program part" control.
You can use the "SelectNCPartProgram" function to select all part programs via the NCU
domain services.
For example, this allows you to create special screens for permanently-defined part
programs. These screens can then support a simplified selection process using buttons.
Parameter
Connection
Channel
Path name
Program name
Note
Together, the path name and program name parameters must indicate the part program
path.
Enter only the absolute program or path name.
Path name examples:
• MPF_DIR for main directory
• SPF_DIR for subdirectory
• WKS_DIR for workpiece program directory
Procedure on the HMI device
The specified part program is selected on the NC for editing.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring PI services of the NC as system functions
Meaning
Name of the connection to the NC.
Channel, for which the program is selected: 1 – max. 10
(variable or constant)
Absolute path details for the program directory
(variable or constant)
The name of the program or workpiece to be edited (variable or constant)
9.5 Running NC functions from WinCC
131