Siemens sinumerik 840d sl Configuration Manual page 72

Configuring variables
6.2 Configuring NC tags
4. Click the "Expand" icon in the "Address" field.
The dialog for selecting SINUMERIK tags opens.
Figure 6-1
5. Select the required tag in the structure, adapt the values, if necessary (for example, for
the channel or axis), and click "Confirm".
6. Make optional settings in the inspector window under "Properties > Properties > General":
Note
Creating tags directly at the point of use
You can also create new tags directly at the point of use, for example, at an I/O field. To do
this, click the "Add" button in the object list. You then configure the new tag in the Inspector
window.
72
Dialog for selecting SINUMERIK tags
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014