Siemens sinumerik 840d sl Configuration Manual page 56

Device configuration
4.6 Adding a SIMATIC Panel
2. Make the required settings:
3. Click "OK" to confirm your settings.
Result
The device is added and, depending on your settings, the HMI device wizard or the project
view opens.
The following editors are available in the project tree below the device (for example,
"HMI_SIMATIC_Panel [MP 177 6" mono DP]"):
● "Connections"
● "HMI variables"
● "HMI messages"
● "Screens"
56
Element
Device name
Folder structure
Version
Open the device wizard
Purpose
Assign a device name (e.g. "HMI_SIMATIC_Panel ").
Under "HMI", select a SIMATIC Panel (for example, "MP 177 6" mono
DP")
Runtime is integrated for SIMATIC Panels. Select the required
Runtime version in this drop-down list.
To start the HMI device wizard after adding the device, select this
check box.
Use the HMI device wizard to define the basic settings for your HMI
device, for example, the screen layout or the connection to your PLC.
Note that you still need to make other settings in the device view, for
example, you need to create the connection to the NC.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014