Siemens sinumerik 840d sl Configuration Manual page 117

General properties
Under "General", you can make the following settings for subprogram selection:
Property
Connection > Name
Path > Name
Path > Variable
Channel > Name
Channel > Variable
Channel > Editable
Path > Editable
Additional properties
You can customize the complete representation of the "NC subprogram" display object using
Design, Layout, Representation, Text, Flashing and Miscellaneous.
Additional information concerning the properties of WinCC display objects
Information concerning the properties for WinCC display objects can be found in the
information system of the TIA Portal. This contains not only detailed descriptions, but also
Tooltips directly for the individual properties.
"Layout" property
You can select which buttons, etc. should be displayed in the display object under "Layout".
Events
In order to also be able to operate the "NC subprogram" externally or, depending on the
functionality, to allocate an appropriate authorization, command buttons can be hidden in the
display object during the configuration. The required functionality can be triggered via
softkeys with various authorization levels.
If you have selected the "NC subprogram" display object, you can configure functions for
Events in the Inspector window using "Properties > Events".
Table 8- 2
Event
Enable
Disable
Additional information
Information about the configurable functions of the "NC subprogram" display object are
contained in Section Configuring PI services of the NC as system functions (Page 119).
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Events for the "NC subprogram" display object
8.3 Properties of the "NC part program" display object
Description
Select the connection to NC.
Select a predefined path name (max. 29 characters, in uppercase
letters). For example, WKS_DIR, MPF_DIR, SPF_DIR, CST_DIR,
CUS_DIR or CMA_DIR.
Select the connected path variable.
Select one of the predefined channels (1 - 10).
Select the connected channel variable.
You can enable/disable editing of the paths or channels by select-
ing the "Editable" field.
Meaning
On selection, the display object is activated.
On deselection, the display object is deactivated.
Configuring screen objects
117