Introduction
1.4 Sample configuration procedure
NCSecurity example
The sample project shows how the NC tag "accesslevel" can be used to control the visibility
and operability of an I/O field.
To view the relevant settings, proceed as follows:
1. Double-click "PC_System_1 > HMI_RT_1 > Screens > Screen_1" in the project tree.
2. Select the relevant I/O field. In the "Properties > Animations > View" Inspector window,
switch to the lower-level settings ("Operability" or "Visibility").
Figure 1-4
Settings in the NCSecurity sample project (for "Key Switch Pos 3")
22
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014