Siemens sinumerik 840d sl Configuration Manual page 147

3. Confirm the settings with "Exit".
A dialog for prompting saving appears.
– Select "Yes" to save all entries and the dialog box is exited.
– Select "No" and the dialog box is exited without saving the entries.
– Select "Cancel" to cancel the close process and return to the integration tool.
Result
Runtime is integrated according to your settings in SINUMERIK Operate.
You usually need to integrate Runtime in SINUMERIK Operate only once. You only need to
repeat the process if you want to change something in the settings for the integration of
Runtime in SINUMERIK Operate (e.g. the softkey position).
If you change the configuration, although you need to save the latest compiled configuration
file again at the configured location, Runtime does not need to be integrated into
SINUMERIK Operate again.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
No Array Definition/Action
.
④
SINUMERIK HMI Here you can define whether the header of SINUMERIK Operate (display
header visible of the operating area, operating mode, alarms, etc.) is to be visible for the
WinCC application.
•
•
If YES is entered here, the location of the header on the configuration
interface of each WinCC screen must be kept free for this. See: Configu-
ration of the screen size (PC systems) (Page 53)
⑤
Load WinCC RT Specifies if the application is started in the background during power up
during power up of SINUMERIK Operate.
•
•
⑥
These system Here you can define whether/which keys are to be provided directly to the
keys are only application. The selected system keys are not processed by SINUMERIK
processed by Operate.
WinCC RT
•
•
⑦
Softkey visible Use the drop-down menu to specify as of which access level the softkey
is visible.
as of access
level
⑧
Language The softkey labeling for the respective language can be entered in the
/softkey text input boxes under softkey text.
Loading and integrating a configuration (PC systems)
11.3 Integrating Runtime in SINUMERIK Operate (PC systems)
NO: Header is not visible.
YES: Header is visible.
NO: Application is not started.
YES: Application is started.
Alarm acknowledgement: ESC is directly assigned to the application
Channel switching: F11 is directly assigned to the application
147