Brother 884-T13 Operation Manual page 263

k Touch , then the machine starts to
detect the location of the embroidery
positioning sticker.
l When the machine's built-in camera has
finished detecting the location of the
embroidery positioning sticker, the
following message appears. Touch
Note
• If the built-in camera cannot detect the
location of the embroidery positioning
sticker, the following error message
appears. Touch
frame to its previous orientation, and then
perform the procedure again starting from
h
step .
m Remove the embroidery positioning sticker
from the fabric.
.
, return the jumbo
n Touch to select the next section of the
pattern to be embroidered, and then touch
.
o Touch .
p Touch , and then press the start/stop
button to start embroidering the next
section of the pattern.
APPENDIX
7
261