Brother 884-T13 Operation Manual page 215

Note
• When referring to steps
make sure you select the pattern position to
reflect this exercise.
b Following message appears in step
next pattern or affixed positioning stickers
are close to being out of the embroidering
area. Follow the instructions and then touch
.
1 Embroidering area
1 Pattern to be embroidered next
2 Embroidery sheet
→ The camera detects the two positioning stickers.
a l
through ,
c
m
if the
d
1
SELECTING/EDITING/SAVING PATTERNS
Note
• If the following message appears, rehoop
the fabric as indicated in the screen, and
then touch .
After the sticker position is detected, touch
, and then remove the stickers.
Affix the two positioning stickers again
according to the on-screen instructions so
that the next pattern or positioning marks
can fit in the embroidery area.
→ Touch
so that the camera detects the first
positioning sticker.
5
213