Brother 884-T13 Operation Manual page 143

c Touch .
→ The
mark appears to indicate where the machine
will stop.
1
1
mark
• To cancel the setting, touch
b
d Repeat steps and
you wish to specify.
• Any number of pauses can be specified.
e After specifying the desired settings, touch
.
• If the machine is temporarily turned off when it is
stopped at the specified location after embroidering,
you will be asked if you wish to continue sewing or
select a new pattern when the machine is turned on
again.
Touch to continue embroidering. (Refer to
"Resume Embroidering After Turning Off the
Machine" on page 122.)
Memo
• If the machine is temporarily turned off, the
settings to stop the machine at color
changes specified before the machine was
turned off are not cancelled. However, the
settings are cancelled if a new pattern is
selected.
• If a pattern with the settings to stop the
machine at color changes is saved, the
settings to stop the machine at color
changes are also saved.
again.
c
for each pause that
EMBROIDERING SETTINGS
141
4