Table of Contents
Advertisement
e
Touch
.
f
When the following message appears, touch
.
→ The built-in camera automatically detects the
embroidery positioning sticker, and then the
embroidery frame is moved so that the starting
position of the embroidery pattern is aligned with
the center of the large circle in the embroidery
positioning sticker.
g
When the machine's built-in camera has
finished detecting the location of the
embroidery positioning sticker, the
following message appears.
Memo
• You can touch
embroidery position is correctly aligned
before removing the embroidery positioning
sticker.
• Touch
for the closer image.
• Touch
again to return to the previous
screen.
to confirm the
OTHER BASIC PROCEDURES
h
Remove the embroidery positioning sticker
from the fabric.
Touch
.
i
Note
• If the following error message appears,
touch
, remove the embroidery
positioning sticker, and then affix it within
the embroidering area. Then, touch
again.
j
Touch
.
k
Touch
, and then press the start/stop
button to start embroidering.
Note
• After all of the included embroidery
positioning stickers have been used, new
ones can be purchased separately. When
purchasing new ones, check "Optional
Accessories" on page 22 for the part code,
and then contact your nearest authorized
Brother dealer.
3
109
Advertisement
Table of Contents
Troubleshooting
