Brother 884-T13 Operation Manual page 158

c If the key for the character that you wish to
select is not displayed, touch the tab for the
desired set of characters.
1
2
3
4
5
1 Uppercase letters
2 Lowercase letters
3 Numbers/symbols
4 Accented characters
5 Touch this key to change the character font.
→ The text input screen for the characters shown on
the tab appears.
• To change the character font, touch
to the font selection screen.
d Enter "L".
→ The selected characters appear in the text preview
area and the pattern display area
156
e With the first character entered, touch
to change the size of the character.
1
3
1 Text preview area
2 Pattern display area
3 Touch this key to change the size.
to return
• The next characters that are selected will have the
new character size.
• The character size of all entered characters cannot be
changed after the characters are combined. (The size
of the entire pattern can be changed from the pattern
editing screen.)
Note
• Size of the six small fonts
of these smaller fonts are shown on page
4/4 of the font selection screen.
2
and cannot be changed. All