Brother 884-T13 Operation Manual page 109

c Touch , or
for specifying the starting position, rotating
the pattern or moving the embroidery
frame.
• For details on each of the keys, refer to the following
sections.
"Starting/Ending Position Settings" on page 135,
"Adjusting the angle" on page 99 and "Changing the
Embroidering Position" on page 98.
1
2
3
1 Use these keys to adjust the embroidering
position by moving the embroidery frame.
2 Use these keys to rotate the pattern.
3 Use these keys to specify the starting position of
sewing.
• While using these three key panels in the enlarged
camera image, panels will be invisible to show the
pattern and the camera image clearly.
d Touch to return to the normal camera
image.
to display the keys
e
OTHER BASIC PROCEDURES
Memo
• The three key panels can be repositioned so
that the pattern can easily be viewed.
Touch the center of the top of a key panel to
view possible locations where the panel can
be repositioned. Touch the desired location
to move the selected key panel.
The possible locations for repositioning the
panel appear in gray.
The key panel moves to the selected
location.
Touch to return to the previous
screen.
Note
• When using the camera to align the
embroidering position on thick fabric, use
the thick fabric sensor as described in
"Positioning the pattern on thick fabric" on
page 104.
3
107