Table of Contents
Advertisement
■ Trial Sewing
Sew trial embroidery to check that the pattern will
be slid the correct distance.
a
Select the pattern, and then continue to the
embroidering settings screen.
b
Press
in the embroidering settings
screen.
c
Embroider the first pattern.
e
d
Refer to steps
through
three patterns to select the next pattern.
e
Move the pattern according to the distance
measured in "Measuring the distance that
the pattern will be slid", and then touch
.
f
h
of Connecting
g
SELECTING/EDITING/SAVING PATTERNS
Specify the distance that the pattern is to be
slid, and then touch
→ Message appears on screen and carriage will move
after pressing
.
j
Continue with step
patterns to finish connecting the patterns.
Note
• After checking that the trial embroidery
results are satisfactory, sew the actual
embroidery. If you decide to change the
distance that the pattern is slid after
checking the trial embroidery, change the
settings selected in step
.
of Connecting three
f
.
217
5
Advertisement
Table of Contents
Troubleshooting
