Brother 884-T13 Operation Manual page 223

■ Page 3
A Reserved Needle
A specific thread color can be set to a needle bar.
The specified color remains assigned to the
needle bar specified here until the setting is
cancelled. You can also specify the maximum
sewing speed for a needle bar as well as cancel
automatic needle threading. This feature is not
accessible through the embroidering screen.
(Refer to "Reserved Needle Bar and Sewing
Speed Settings" on page 143.)
■ Page 4
A
B Select settings for the "Eco Mode" and "Shutoff
C Screen Saver
D Opening Screen
E Spool Stand LED
F Light
G Speaker
BASIC SETTINGS AND HELP FEATURE
Support Mode". (Refer to "Selecting the "Eco
Mode" or "Shutoff Support Mode"" on page 229.)
Select the length of time until the screen saver
appears, and change the image of the screen
saver. (Refer to page 229.)
The machine can be set so that the opening
screen is either displayed ("ON") or not displayed
("OFF") when the machine is turned on.
The spool stand LED setting can be changed. The
LEDs can be used to show the embroidery thread
color or to indicate error details and warnings to
replace the thread spool. (Refer to page 231.)
The brightness of the sewing light can be
adjusted. (Refer to page 18 or 232.)
The volume of operation sounds and alarm
sounds can be adjusted. (Refer to page 19 or 232.)
B
C
D
E
F
G
6
221