Engine - Adjust; Turning Gear - Use - Mitsubishi S6R Series Service Manual

1. Engine - Adjust

1.1 Turning Gear - Use

Before starting the engine, make sure that the turning gear is in the engine running position. If the engine is started
with the turning gear engaged (pushed-in position), it will result in personal injury as well as damage to ring gear.
(1) Loosen two bolts, and remove the plate from slot of
shaft.
(2) Push-in the shaft all the way so that it engages with ring
gear.
(3) Using a socket and ratchet handle, rotate the shaft for
turning crankshaft.
(4) After the turning, pull-out the shaft, insert the plate into
slot of shaft, and tighten the bolts.
Make sure that the plate is firmly fitted in slot of shaft.
Chapter 13 ADJUSTMENT AND OPERATION
Bolt
Shaft
Bolt
Turning Gear - Use (for Engine Running)
Turning Gear - Use (Push-in)
Socket
Ratchet handle
Turning Gear - Use (for Turning)
Chapter 13 ADJUSTMENT AND OPERATION
Plate
13-3