Governor Drive - Assemble - Mitsubishi S6R Series Service Manual

Chapter 8 FUEL SYSTEM

2.10 Governor Drive - Assemble

Shrink fit
(200°C [392°F] or below)
Backlash
0.12 to 0.18 mm
[0.0047 to 0.0071 in.]
Shrink fit
(200°C [392°F] or below)
* Woodward PSG or EG-3P type governor
2.10.1 Drive Gear and Idler Gear Backlash - Measure
Measure the drive gear and idler gear backlash. If the value exceeds the limit, replace the drive gear or idler gear with a new
one.
Item
Backlash between drive gear and idler gear
8-38
Governor Drive - Assemble
Standard value
0.12 to 0.18 mm [0.0047 to 0.0071 in.]
Oil pressure governor spec
108 ± 5.4 N·m
{11 ± 0.55 kgf·m}
[80 ± 4.0 lbf·ft]
Limit value
0.4 mm [0.016 in.]