Distributer Valve - Inspect - Mitsubishi S6R Series Service Manual

Chapter 12 AIR START SYSTEM

2.7 Distributer Valve - Inspect

2.7.1 Distributer Valve Height - Measure
Measure the distributer valve height. If the value exceeds
the limit, replace the valve with a new one.
Item
Distributer valve height
2.7.2 Clearance Between Distributer Shaft and
Bushing - Measure
Measure the clearance between the distributer shaft and
bushing. If the value exceeds the limit, replace the distrib-
uter shaft or bushing with a new one.
Item
Clearance between shaft and
bushing
12-12
Standard value Limit value
21.85 to 21.95 mm 21.75 mm
[0.8602 to 0.8642 in.] [0.8563 in.]
Standard value Limit value
0.050 to 0.091 mm 0.150 mm
[0.0020 to 0.0036 in.] [0.0059 in.]
Distributer Valve Height - Measure
Clearance Between Distributer Shaft and Bushing
- Measure